Skip to main content
Journey App (internal)
Albert Basiul avatar
Written by Albert Basiul
Updated over 7 months ago

Main information

Journey APP is a tool for driver to assign vehicle, manage his trips type, fill inspection report and check his history trips. Driver can check summary of his trips. Driver can track amount of kilometers for private trips, what is very important for taxes.

There is no need to install and buy additional hardware (ibutton, RFID cards, readers), driver assignation can be done by driver on his phone.

Journey APP could be used on any device (PC, tablet, mobile phone). Journey app can be installed as separate application or it can be reached in web browser.

Journey app webpage

Journey app in APP and PLAY stores

App can be found using key words:
”Journey tracks”

Journey app installation

Android:

After login to Journey app you can install it on the device:

image-20220823-091411.png

IOs:

In your Safari browser go to https://journey.fm-track.com/ press share and scroll down, press add to home screen:

image-20221109-083432.png
image-20221109-083509.png

Journey app logins

Journey app credentials can be created in TrustTrack2 drivers module:

image-20220823-091535.png

NOTE: to enable possibility to create journey app credentials please register consultation and provide client name and TT2 client ID.

After email is entered invitation to setup password will be sent to driver:

image-20220823-091745.png

Home page

Assign vehicle

Driver in application can assign vehicle to himself:

image-20220823-092244
image-20220823-092317
image-20220823-092430

NOTE: only object with manual driver detection can be assigned in Journey app

If driver is assigned automatically to the vehicle then in Journey app there will be not possible to change vehicle until driver will be unassigned:

image-20220823-093254

Select trip type:

Driver in application can select trip type. So that all future trips will have selected type:

image-20220823-093745

NOTE: only for object with manual trip type selection it is possible to select trip type. For object with automatic detection, only current type will be visible.

Inspection report

History

image-20220901-065419

In history tab driver will be able to check his trips history. Trips detection logic is same as in TT2, information is same as in trips report for driver.

Maximum period is 1 month.

  • Summary contains these data:

    • Mileage for period- sum of all trips mileage for selected period

    • Private trip mileage- sum of all private trips mileage for selected period

    • Business trip mileage - sum of all business trips mileage for selected period

    • Work trip mileage - sum of all work trips mileage for selected period

    • None trip mileage - sum of all none trips mileage for selected period

    • Work time- sum of driving durations for selected period.

    • Stop time- sum of all stop durations for selected period

  • Each trip contains these data:

    • Start time

    • End time

    • Stop duration

    • Driving duration

    • Total duration (Start+stop time)

    • Mileage

    • Trip type

    • Notes

    • Vehicle

    • Stop addresses

    • Address of first start point for selected period

There is possibility to preview trips on the map, change trip type and add notes:

image-20220901-065719

Settings

image-20220901-065223.png

In settings you can find driver name and surname. There is a log out button.

Related documentation:

Did this answer your question?