This article explains how to check installation method for Car Sharing object in TT2.
Steps:
1. Open Admin panel (LCM);
2. Find object in LCM (Admin panel) under Objects:
Note: in case the object cannot be found using full number plate, use company name "Ride share" and digits only (in Bulgaria, some plate numbers can have Cyrillic letters, in Romania some plates have spaces):
In some rare occasions, the plate number is not input in the system. You should ask for at least 5 last digits of VIN number instead. Use it with company name "Ride Share":
3. Click "View/edit":
4. Check the vehicle model in Object settings in LCM:
5. Check the installation method used in the vehicle from the Confluence page:
Note: Be careful - some vehicles can be connected using older methods! Which method is being used in the specific device can be checked in CFG update module, with configuration file name used:
6. Take notes which DOUTs are used for commands execution for this specific car model, this information will be needed during diagnostics. Notes on the right side shall be useful as well.
Note: "ATH" means DOUT used for Ignition blocking.