Description:
Two commands can be used:
For HW and FW:
For HW:
Required information:
Phone number | |
SMS password |
A. Steps (command "version"):
1- Send the SMS command "version" to the device phone number (precede it with the sms password if necessary).
2- You will receive the following answer:
Command "version" returns 5 parameters:
1. Bootloader version.
2. Firmware version.
3. Hardware version.
4. GSM signal level.
5. Voltage status.
The device can be identified by the first 2 HEX symbols of bootloader version.
List of possible values, can be shared with customers. Additional information regarding special devices can be consulted in this confidentials list only available to Ruptela Support.
Bootloader sign “letter” | Bootloader sign | Device Type |
A | 0x41 | Trace5 GL |
B | 0x42 | Trace5-LTM |
D | 0x44 | Trace5 Rev.A - all versions - 2G, LTM, LTE EMEA, LTE LA. |
E | 0x45 | FM-Eco4 |
F | 0x46 | FM-Pro4-BT |
G | 0x47 | FM-Tco4 HCV BT |
g | 0x67 | HCV5 Lite, Pro5 Lite |
H | 0x48 | FM-Tco4 LCV BT |
J | 0x4A | FM-Eco4 RS T |
K | 0x4B | Pro5 |
L | 0x4C | FM-Tco4 LCV |
M | 0x4D | HCV5 |
N | 0x4E | LCV5 |
O | 0x4F | FM-Plug4 |
P | 0x50 | FM-Pro4 |
R | 0x52 | Trace5 NA |
S | 0x53 | FM-Eco4 S/T |
T | 0x54 | FM-Tco4-HCV |
E | 0x65 | Plug5 |
g | 0x67 | HCV5 Lite, Pro5 Lite |
Example of response from Plug4 device:
4F2B,00.03.51.14,2269,23,1
4F2B - Plug4 model (see list above).
00.03.51.14 - FW version
2269 - Hardware version
23 - GSM signal level
1 - Voltage status (on)
B. Steps (command "info"):
1- Send the SMS command "info hwid" to the device phone number (precede it with the sms password if necessary).
You will receive an answer such as:
FMEU4-21-1-1
2- Go to the following Confluence page HERE (only Support) and search by the id received:
The device model is a Trace5-LTM (Rev.A)