Description:
If Client wants that an object (which has a Fuel sensor installed) would display in the TT History module the fuel consumption per 1 hour and per 100 km:
please provide him/her with an explanation like below:
Answer:
Current History module settings are:
1. Fuel consumption parameter is calculated and shown based on CANbus data OR
2. if the fuel consumption parameter is not coming, customer can select a known average fuel consumption value in the object settings:
Go to object settings>Calculated Inputs and make sure Fuel Consumption is unticked and Save:
Go to object settings>Average fuel consumption and input consumption value and Save:
OR
Go to TT2, find the object>Summary>Vehicle details and input Fuel tank capacity and Consumption details and Save:
Then, fuel consumption is calculated based on that value and traveled distance.
For example, if you input your car Consumption at 10l/100km, and the car runs for 200 km on a day, Consumption will be calculated at 20 liters in the Reports.
The fuel consumption value could be shown in the format: l/100km OR km/l.
In this case, we do not have data from the CANbus, only data from the fuel level sensor.
So, here we can suggest only, for example, using a fuel tank report and making calculations manually (hour counter enabled).
In a fuel tank report, the fuel consumption is calculated based on the fuel level (parameter will be visible only in the report).
If there is a requirement to adjust the TT History module or Reports, then we can only suggest for the Client to register a New Feature Request. For it is needed as detailed information as possible on the requirements. After NFR registration, the next step is business case evaluation, finding out possibilities and costs.
Further reading: