Skip to main content
All CollectionsKnowledge Articles (Internal base)HW only
Mechatronics Fuel Level Sensors support with Ruptela devices
Mechatronics Fuel Level Sensors support with Ruptela devices
Albert Basiul avatar
Written by Albert Basiul
Updated over 7 months ago

Description:

If the below-listed sensors are compatible with Ruptela device's

  1. Mechatronics Eurosens Dizzi (ultrasonic fuel level sensor)

  2. Mechatronics Eurosens Dominator BT

Answer:

  1. Mechatronics Dominator with physical interfaces (RS232, RS485, Analog) are compatible with our devices that have corresponding interfaces. For RS232 and RS485 our devices use a 19200 baud rate and LLS protocol.

  2. Mechatronics Dizzy - we never tried it, but since it uses LLS protocol, it should work with our devices as well.

  3. Mechatronics Dominator BT is compatible with all devices that have BT: HCV5, LCV5, Pro5, HCV5-Lite, Pro5-Lite, Trace5-LTE-IP67-EMEA, and Trace5-LTE-IP67-LA.
    In order to configure it, simply select this type of Bluetooth LE accessory and enter its MAC. And don’t forget to Enable IO parameters!

Did this answer your question?