Skip to main content
Omnicomm Analog sensors support
Albert Basiul avatar
Written by Albert Basiul
Updated over 7 months ago

Description:

If Omnicomm sensors are supported by connecting to an analog input of our devices.
Sensor documentation: https://doc.omnicomm.ru/en/omnicomm_lls-af_4-manual

Answer:

Analog input of our devices could be used for that.
Example of AIN1 configuration:


If connected to AIN, the sensor must be used in “Analog” mode. Most probably green wire of Omnicomm has to be connected to the selected Analog input (need to check wiring and pins scheme in sensor documentation).

Did this answer your question?